| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
750mm Width Liangchi PVC Filler Made in China Cross Fluted Cooling Tower Fill Replacement Media
Product: cooling tower fills pvc cooling tower fill
1) Material: pvc, pp (100% new material or 80% new material )
2) Usage: cooling tower
3) Type: cooling tower part
Cooling tower fill is one of the most important components for exchange of gas and water in cooling tower. It is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation. With the development of the plastic industry, counter current tower drench water plastic packing "S" shape ladder wave, obliquely wave, which has the heat dissipation, good performance, ventilated small resistance, durable, based on the easy and other advantages, it is widely used in different types of large, medium, small cooling tower.| Name | Cooling Tower Fill |
| Material | PP, PVC |
| Width | 150mm, 305mm, 610mm, 375mm, 750mm, 1220mm, 1520mm, etc |
| Thickness | 0.27mm - 0.5mm |
| Length | Any length |
| Sample | Available |
| Package | Pallet, or wooden case |
Feature of cooling tower fill
1. Greater cooling capacity in a given space
2.Low-clog designs available
3.Available in bottom supported or hanging designs
4.FM approval available
5. Crossflow and counterflow designs
6. Integral louvers and eliminators available in crossflow design.
7.High-temperature designs availableigle-piece, full-height counterflow designs available
Parameter of cooling tower fill
1. The thickness is from 0.22mm to 0.45mm which the raw material PVC sheets are in good quality and strong enough for the fill.
2. The width is 810mm, and the length is usually 3660mm, which would bring much convenience in the installation and application.
3. The pitch is 19-20mm, that means the distance between two loose fill sheets is 19-20mm. It is hanging on the fiberglass tubes in two sides of the cooling tower.
And there are A type and B type which make joint points on two loose sheets match very well.
|
|
|
|
|
|
|
|
|
Welcome your inquiry, we would give feedback within 24 hours.
){kind=link}