1-1000M3 Factory price frp panel water tanks fibre reinfoced grp sectional water tank
For WATER STORAGE TANK,LONGTIME can support you with 3 types of tanks which adopt different material: SMC(FRP,GRP) water tank, hot dipped galvanized water tank, and stainless steel water tank. If any item interests you,welcome here! Now the following is the overview for SMC(FRP,GRP) water tank!
GRP Water Storage Tank
What is SMC material?(SMC tank also called FRP,GRP tank)
1. Sheet Molding Compound is a fiber-reinforced material, which consists primarily of a thermosetting resin glass fiber.
2. SMC is a high tech material that is used in the manufacturing process in most of our products ranges.
3. The advantage of SMC include, high impact compressive, flexural and tensile strength along with temperature stability.
4. SMC has low profile, low shrink for excellent surface appearance and painting.it's color pigmentable and has excellent
chemical and electrical resistance varied to provide insulation, conductivity or anti static properties.
Accessory details of sectional grp water tank:
Feastures of GRP water tank:
High Strength and light weight;
No Rust and Stong corrosion resistant performance;
Food grade Material and Heathy and Safe;
Flexiable design and fee combination;
Resonable price and excellent service;
Easy to install and convininent to Maintain;
Easy to transport and UV resistant;
Health and environmental protection, will not grow bacteria;
Large capacity and sectional type water tank.
Application of GRP water tank:
GRP water tank can be used as following
- Potable Water Storage Tanks
- Rain Water Harvesting Tanks, Well Water Tanks, Sea Water Tanks
- Reverse-Osmosis Water Tanks (water with high or low conductivity)
- Fire Reserve Storage Tanks, Swimming Pool Balance Tanks
- Distillation and Process Tanks
- Septic Tanks and Sewage Tanks
- Industrial Process Tanks, Chiller Water Tanks, Cooling Tower Water Tanks
- Hot Water Storage Tanks and Chemical Substance Storage Tanks
- Agricultural Irrigation Tanks.
The description of sectional GRP water tank:
| Material |
GRP/FRP/SMC(fiberglass, unsaturated resin, filler,etc) |
| Size |
1x1m, 1x0.5m, 0.5x0.5m |
| Panel Shape |
Square shape , or rectangle shape |
| Thickness |
4-20mm, |
| Remarks |
Thickness Tolerance: ±0.2mm |
| Volume |
From 1m3 to 1000m3 |
| COLOR |
color as green, white, blue,red,etc |
SMC water tank physical
and chemical properties |
ensile strength (Mpa)≥60 |
| Bending strength (Mpa)≥100 |
| Bending modulus (Gpa)≥7.0 |
| Pap hardness≥60 |
| Bibulous rate,%≤1.0 |
| Glass fiber content,%≥25 |
| Leakage |
No leakage after filled with water |
| Full of water deformation |
Filled with water, wall maximum deformation after no more
than 1.0% of the tank bottom center height, no more than 10 mm
maximum deformation |
| Water quality |
Accord with GB5740, can be used for potable water storage |
| Packaging Details |
Product packaging by the standards of each country.
From plastic packaging,to a high standard and packed into wooden traysvary in size,depending on the quantity purchased customs pace-saving purposes. |
| Delivery time |
Water tank leadtime within 30days |
What should we do if the water tank is leaking?
We normally provide installation direction and videos for buyers, if with correct steps, then tank won't leak water. But if after finish the tank, it is leaking, what should we do?
First of all, it is necessary to distinguish where the sectional water tank is leaking. Generally, the problem is mainly concentrated in the plate, the joint between the plate and the plate, the four corners and the plugging. If the sheet is leaking, it means there is a problem with the quality of the sheet, which is to be replaced or returned by the manufacturer; if the joint between the sheet and the sheet is leaking, it means that the middle rubber strip is not clamped or the bolts are not tightened. The solution is to tighten the bolts (tighten one end). ) ; If water leaks at the four corners and the plugging area, it means that the rubber strip is not placed properly or the direction of the plugging is wrong. The solution is to remove the plugging, put some rubber strips, and reinstall it.
The following shows our workshop, we have stock and we can ship goods with fast delivery time:
Packing and Parts
We usually use wooden pallet or container,to make sure the clients received the goods in perfect condition.
The accessory can be galvanized or stainless steel accessory.
Galvanized steel water tank for options:
Our service
1.Our quality guarantee
The water tank has one year's guarantee. If any problems,our technician will figure out ,according to client's feedback. Parts will be replaced for free if caused by quality fault.
2.Fast delivery time save your efficiency
For standard size water tank it would be 7-10 days
For customized size water tank it would be 15 -30 days.
Trial order is acceptable. We can customize according to your request.
Welcome to contact us for 50000L Thermal insulation combined grp water storage tank frp panel tanks, we will feedback within 24 hours.
){kind=link}
){kind=link}