Sealing Modular Flexible Sectional Square Water Tank SMC GRP FRP Fiberglass Panel Drinking Water Treatment Storage Tank
grp sectional panel tank
Fiberglass water storage tank also called FRP water storage tank, SMC water storage tank, fiberglass water tank, GRP panel water tank, GRP or FRP assembly water tank. It is a new type of tank. It is made of high qualified SMC panels. Sheet molding compound (SMC) is a kind of fiberglass reinforced plastic, which is a mixture of unsaturated polyester resin with impregnating augmentation material, filling material and glass fiber. SMC water tank is nontoxic, durable, lightweight, corrosion resistant and good-looking. Meanwhile, it's easy to maintain and long-life. It is widely used in water storage in residential buildings, schools, hotel. SMC water tanks are used both for domestic water as well as medicine and health where needs good water supply quality.
Parameter
| Project |
Performance Index |
| Tensile strength(Mpa) |
≥60 |
| Bending strength(Mpa) |
≥100 |
| Bending modulus(Gpa) |
≥7.0 |
| Pap hardness |
≥60 |
| Bibulous rate(%) |
≥60 |
| Fiberglass content |
≥25 |
| Maximum distortion of side wall |
≤0.5% |
Advantage
SMC/GRP/FRP Sectional Water Tank
1. Excellent UV and weather-resistant characteristics; Corrosion resistant; anti-rusted.
2. High strength and Durability.
3. Non-leakage.
4. Excellent Hygienic, good water quality: non-toxic and corrosion from panels and prevent bacteria increasing.
5. High seismic tolerances; Does not deform or dent.
6. Low thermal conductivity and excellent thermal insulation.
7. Easy to clean and maintenance management convenient.
Applications
grp drinking water tank
1. Potable Water Storage Tanks
2. Fire Reserve Storage Tanks, Swimming Pool Balance Tanks
3. Boiler system of the supplementary water tank, heat preservation water tank.
4. Septic Tanks and Sewage Tanks5. Rain Water Harvesting Tanks, Well Water Tanks, Sea Water Tanks 6. Reverse-Osmosis Water Tanks (water with high or low conductivity) 7. Distillation and Process Tanks 8. Industrial Process Tanks, Chiller Water Tanks, Cooling Tower Water Tanks 9. Hot Water Storage Tanks and Chemical Substance Storage Tanks 10. Agricultural Irrigation Tanks.
Installation
grp sectional water storage tank
Installs use matters needing attention:
1, SMC combined type water tank design to store up the normal temperature tap water before please do not store up the hot water and other liquids (chemicals, petroleum and so on)
2. Constructions, please press the foundation size request, the installment stays, provides the water which the construction power source and the inspection seal uses.
3. Must avoid nearby the water tank using the fire. When carries on the welding work, must take the protective measures, do not cause flake to splash to water tank stave sheet
4. Must prevent the pollutant or plunges in the water tank from the exterior inflow. Easy to inspect and in order to the security from the maintenance, must have certain spatial around the water tank
5. SMC combined type water tank's maintenance: Cleaning water tank interior and exterior please use the soft apparatus. The long time has not used water, before the use, please first water discharge, makes the inspection after the water tank interior uses again. New clothing's water tank, must clean twice times before using.
Accessories
Grp Sectional Water Tank
1. Support for Panels: The panels shall be supported externally or internally by an adequate support system.
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products.
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304.
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304.
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent.
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter.
8. Man-hole opening & Inspection Hatches: the size can be customized;
9. ABS roof vent with PE insect screen.
10. Float level indicator, optional SS304 for internal and external support structure are available on request.
Packing & Delivery
FAQ
1.What is your advantage?
WIth large quantity of panels in stock, we can guarantee a quick lead time and a more favorable price.
2.Do you provide installation guidance?
Yes, we can provide installation guide: installation video or installation assistance on site by our engineers.
3.How long is the delivery time?
For standard water tank less than 100m3, it would be 7-10 days; For non-standard water
tank and customized water tank according to client s specific requirements, it would be 15 to 30 days.
4.What is the warranty time for your products?
The warranty time of our products is 24 months, which guarantees a good after-sale service.
5.What's the guarantee, in case the water tank breaks down?
The water tank has two year's guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to client's feedback. Parts will be replaced for free if the problems are caused by quality fault.
){kind=link}
){kind=link}