1-1000m3 Anti-Aging Fibreglass Sectional GRP Water Storage Tank

• Certification: ISO9001
• Wall Thickness: 14mm
• Installation: Sitting Type
• Material: FRP
• Type: SMC Water Tank
• Capacity: 1-5000m3
• Model NO.: LT-WT10
• Color: White
• Technology: Moulding
• Panel Thickness: 1-16mm
• Panel Size: 1*1m,0.5*1m
• Transport Package: Pallet
• Specification: fiberglass water tank
• Trademark: LongTime
• Origin: Hebei, China
• Production Capacity: 5000sets/Month

Product Description

Product Description

 

1000M3 anti-aging Fibreglass Sectional GRP Water Storage Tank

GRP is the abbreviation of Glassfiber Reinforced Plastic.GRP water tank can also be called FRP(Fiberglass Reinforced Plastics) water tank. GRP is mainly composed by fiberglass and resin which will directly determine the quality of GRP Water Tank.GRP water tank is assembled by GRP panels. Panel connected by bolts and nuts. And between each panels,there is rubber strip,so that it makes sure non-leakage.For GRP panels, it is made from SMC(Sheet Molding Composite) by hydraulic hot pressed under temperature (150 ° C) and pressure conditions to maintain the best endurance.

Item	Performance indicators	Item	Performance indicators
Tensile strength Mpa	>60	Compressive strength Mpa	>145
Bending strength Mpa	>100	Shear strength Mpa	>90
Flexural modulus Gpa	>7.0	Impact strength KJ/M2	>75
Pap strength	>60	Breakdown voltage Kv/mm	10-18
Water absorption %	>1.0	Volume resistance Ω	>10
Glass fiber content %	<25	Shrink rate %	0.157

accessories

GRP water tank includes four parts:
1.Panels ( Bottom panel, wall panel, roof panel and manhole) 2. Internal parts ( Internal ladder, tiepiece rod, support, flanges and rubber); 3. External parts ( External ladder, angle iron, tiepiece board, bolts and nuts);
4.U-steel base (surface treatment can be painted or hot dipped galvanized or stainless steel).

GRP water tank accessories
1.1 GRP water tank panel
The panel is made of fiberglass reinforced plastic.
The size of the panel is : 1000*1000mm,1000*500mm, 500*500mm.
The thickness of the panel mainly includes: 5mm16mm,etc. 
It is different according to the tank dimension.
 
1.2 Flanges
The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.We can make it according to your request.
 
1.3 Reinforcement Method
All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. 
The top panel is supported by top panel support, which shall be made of hot-dipped galvanized material.
 
1.4 Bolt. nut & washers
Hot-dipped galvanized material or stainless steel material.
 
1.5  Sealing material
Non-toxic P.V.C foam tape shall be used in between the joints.
  
1.6 Ladders and Level Indicator

GRP Water Tank Advantange

1. Light weight, high strength.
2. Leak-proof /Water Tightness: Due to the material is fiberglass reinforce plastic with high density, and the sealing tape is high performance with non toxic, so it's leak-proof tank
3. Long lifetime, long durable time: the maximum distortion of the sidewall is less than 1 percent for the height; maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more than 30 years.
4. Corrosion resisting; anti-rusted
5. Easy to clean and maintenance management convenient, Drainage at the tank bottom can be cleaned easily and Manhole panel makes it easy to enter into the water tank inside.
6. Non-toxic, it is made from food grade resin, clean and no pollution. Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented.
7. Convenient Installation: Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation.
 

GRP Water Tank application:
 1. storage and regulation of living water supply & construction water supply
 2. Rainwater Harvesting & Storage;
 3. Effluent/Acid and alkali solution treatment & Storage;
 4.Hospital,buildings,building site, school and other place ;
 5. temporary water storage for expansion of the heating system, condensate tank and construction, geological survey, industry, National defense project etc