Molded FRP Square Mesh Grating Fiberglass Walkway Grating

• After-sales Service: Yes
• Warranty: 12 Months
• Customized: Customized
• Color: Multi-Color
• Surface Treatment: Finished
• Forming Way: Mould
• Model NO.: LT-001
• Shape: Square
• Type: Flat
• Grating Color: Yellow, Red, Green, Blue, White and etc
• Technique: Mould
• Raw Material: 963# Resin
• Transport Package: Wrapped by Plastic Film and Plastic Belt
• Specification: 38*38*38/50*50*50mm and etc
• Trademark: Longtime
• Origin: China
• HS Code: 39269090
• Production Capacity: 10000 Piece/Pieces Per Month

Product Description

Molded frp square mesh grating fiberglass walkway grating

 

>>>Product Description
Molded fiberglass reinforced plastic (FRP) grating provides corrosion resistance in the most demanding environments. Manufactured by combining thermosetting resin with continuous fiberglass rovings in precision molds, each panel contains approximately 65% resin and 35% fiberglass rovings. This combination optimizes corrosion resistance, UV protection, and structural integrity.

Molded grating features:
-Wide range of high-performance resins
-Fire retardant, meeting ASTM E84 and ASTM D635
-Electronically transparent and non-conductive
-Easily fabricated and virtually maintenance free

>>>Molded FRP Fabrication Procedures

• Safety precautions: When cutting Molded grating, always wear safety goggles to protect your eyes and a dust mask to reduce dust inhalation. Also, wear gloves and a shop coat with neck and sleeves taped to prevent skin irritation. Work in a well-lighted and ventilated area.
• Cutting molded grating: Depending on the amount (linear feet) of grating to be cut, a variety of shop tools can be used. For best results, use a heavy-duty rotary saw with a masonry, carbide, or diamond coated blade. Firm support of the panels will prevent shifting. Turning the panel bottom-side-up gives a smooth surface for the saw to ride on and reduces chipping. Be sure to allow for the blade kerf (3/16″) when measuring.
• Grinding: All cut edges should be ground smooth. Use a coarse grit, open coated (resin) grinding disk.
• Finishing: All cut surfaces should be coated with resin to prevent corrosion of glass fibers. A light coating of two-part resin system or urethane spray paint is satisfactory.
• Installation: Provide for a minimum of 1-1/2″ support around all panel edges. Use type "M" stainless steel (type 316) clips every 48″ (maximum) for full 4′ x 12′ panels, a minimum of four clips for any piece.

>>>Specification
 

Mesh size(mm)	Thickness(mm)	Whole panel size(mm)
38×38	25	1400×4200, 1220×3660
	30	1220×3660
	38	1220×3660, 1220×4000, 1525×3660
	65	1220×3660, 1032×2020
50×50	50	1220×3660
25×100	25	1000×4000
40×100	65	1015×1295
38×152	38	1220×3660
19×19/38×38	30	1220×3660
13×13/40×40	40	1010×4050
25×25/50×50	30	1000×4000
Remark	Customized size available based on large order

>>>Advantages


>>>Application

Molded grating is used in many applications for many industries. This grating is perfect for foot traffic and sometimes small vehicles.

• Flooring
• Ramps
• Piers and boat platforms
• Chemical storage
• Crossover platforms and elevated walkways
• Tunnels and bridges
• Sump and trench covers
• Stair treads

>>>Packing and Delivery


>>>Company introduction