Product name |
Oblique wave cooling tower fill |
Material |
PVC, PP |
Width |
150mm, 300mm, 600mm |
Thickness |
0.2 - 0.3mm |
Pitch |
19mm |
Sample |
Available |
Customization |
Accepted |
Application |
Counter flow cooling tower |
In order to save the shipping cost, we advise to glue the fills in customer's site. When it finished gluing, customers can cut
their certain block size to suit for their square brand cooling tower. Please pay more attention to the following things in the gluing:
* Please do not expose the PVC fill under the strong sunshine to avoid any deformed. If the outside temperature is higher than 40 degree, the PVC film fill will be deformed within 1-2 hours under the strong sunshine. No matter it is 100% new PVC or recycle PVC, the strong sunshine will deform it very fast.
* Please do not use the airtight or air impermeability material packing the PVC fill, such as the transparent plastic film or bubble plastic film. That will keep the PVC fill in a higher temperature without any cool air come in and may bring some deformed.
* Please do not use the PVC cooling tower fill if the water temperature is more than 60 degree.
The role of cooling tower fillers in the cooling tower is to increase the heat dissipation and prolong cooling water retention time, increase the heat transfer area, increase the heat transfer.
Cooling tower fill manufactured from rigid PVC sheets conforming for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC sheets that are solvent-welded for maximum strength and resistant to UV, rot, fungus, organic and inorganic solvents, acids, alkali and chemicals normally found in cooling tower waters. Available in various mil thickness and heights, especially designed to meet the distinct needs of your particular application, whether that is new construction, emergency repair, thermal upgrade or reconstruction.