Electrical straight Corner Cable Roller With nylon Aluminum Wheel
Cable pulley roller widely used for the cable laying contractor, utility and electricity supply industry - this includes straight cable rollers, corner cable rollers, triple cable rollers and specialist cable rollers for pulling underground cables into trenches .Cable rollers should always be used when pulling cables.
Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud - cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
More type cable roller
Cable rollers can be divided into ground cable pulleys, power cable pulleys, overhead string pulleys, nylon pulleys, cable wire guide pulleys, large-diameter pulleys, dual-use cable tackles, and lifting pulleys. It is mainly used for protection when laying cable conductors. It saves time and effort. The purpose of the ground cable pulley is to change the direction of cable extension and to protect the cable from friction.
Hot sale mainly includes straight cable rollers, corner cable rollers, triple cable rollers, and some other rope cable roller and specialist cable rollers for pulling underground cables into trenches and ducts .
| Frame material |
galvanized steel / Powder Coating |
| Wheel material |
Aluminium alloy / nylon |
| Frame size |
L530 × W300 × H300mm |
| Wheel size |
Dia140mm × length160mm |
| Load capacity |
150KG |
| Warranty |
3 years |
| Sample |
free |
| Customization |
available |
Application of cable roller
Cable rollers should always be used when pulling cables.
Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being
dragged on the trench bottom or in mud.
Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.Cable laying applications with bends in the route require skid plates of a radius greater than the cables minimum dynamic bending radius.
- The use method of the cable pay-off pulley originates from its overall structure. It has a roller-like shape, and the cable can be coiled on the pulley. Before use, the pay-off pulley must be suspended in the air or placed on the ground by a person for operation. Then other people can find one end of the cable as a traction and pull the pulley forward, so that the pay-off pulley starts to rotate to achieve the purpose of pay-off. The pay-off efficiency is high and effortless. The inner device of the pulley is made of aluminum alloy, which can reduce the friction between the pulley and the cable, and the pay-off is smooth and unobstructed. In general, the use of cable pay-off pulleys has greatly shortened the construction period of communication projects, is simple to operate and fast to transport, and saves time and effort.
The cable roller usually packed by carton
){kind=link}
){kind=link}