Bac Xf-3/Xf-4/Xf-5/Xf-6 Cooling Tower Nozzle

• Cooling Method: Counter Flow
• Ventilation Mode: Natural Ventilation
• Material: PP
• Air Contact Form: Wet
• Air Contact Way: Closed
• Tower Shape: Round/Square
• Model NO.: LT-XF
• Noise Level: Low
• Application Fields: Industrial
• Condition: New
• Color: Carbon Black/Grey, etc
• Dimension: as Standard
• Shaping Mode: Mould Press
• Application: Bac Cooling Tower
• Warranty: 1 Year
• Transport Package: Paper Carton, by Courier
• Trademark: LT
• Origin: Hebei
• HS Code: 3926909090
• Production Capacity: 100000 PCS/Month

Product Description

BAC XF-3/XF-4/XF-5/XF-6 Cooling Tower Nozzle Characteristics:

LongTime offers two types of distribution systems for use on cooling towers, closed circuit fluid coolers and evaporative condensers to optimize performance: pressurized and gravity-feed. Both types of distribution systems use large orifice non-clogging nozzle to ensure effective wetting of the heat transfer surface.

Nozzle kit, BAC XF-3/ XF-4/ XF-5/ XF-6, qty of 25 

Kit includes 25, XF-3/4/5/6 nozzles.

 

BAC Water distribution nozzles

• Patented design for pressurized or gravity feed systems guarantees optimum thermal performance
• Large orifice means non-clogging performance for effective wetting of the heat transfer surface
• Multiple sizes are available to accommodate all system flow rates
• Complete installation kits included

 
 

* Maximum operating temperature from 120°C to 300°C

* Provides homogeneous fluid mix without the use of air agitation

* precluding oxidative decomposition of air agitation of the  solutions

* Improves circulation of the turbulent flow and optimizes mixture of the solutions

* Assures uniform mixture of solutions and improve product quality

* Constructed of carbon fiber-glass-reinforced polypropylene or stainless steel

 

Spray nozzles are designed for optimum coverage of either the fill or coil surface. Optimum coverage increases thermal efficiency while fully wetting the surface. This in turn prevents scale build-up that will lessen the unit capacity. There are several designs for pressurized and gravity feed systems, each fully optimized for the application. Regardless of design, nozzles are easily removed, either to accommodate new flow rates or to replace broken nozzles. To facilitate cleaning or replacement; counterflow nozzles are installed using grommets which also allows the nozzles to be properly positioned. Kits are available, complete with insert grommets for pressurized systems or installation tools for gravity systems.

 

Caution Tip

When cleaning nozzles in a gravity feed system such as a Series 3000 or 1500, do not use a screwdriver or other instrument to force debris through the nozzle. The bottom of the nozzle is a target area that diffuses the water over the fill in an umbrella type pattern. If the target area is broken the water, will pour straight onto the fill surface, possibly causing damage to the fill. In addition, the debris can now possibly begin to clog the fill.

• Multiple sizes are available to accommodate all system flow rates
• Complete installation kits included

 
 

water distribution

Target Nozzles should be inspected regularly for missing, broken and debris blocking the orifice opening. Blocked, missing or broken nozzles and/or orifices disrupt the balance of even water flow over the fill surface and shorts the towers cooling capability.

 Always consider changing all of your nozzles when replacing your fill media. Many times end users have been sold new fill media to restore and/or increase a towers cooling capability and the nozzles have not been given equal attention at that critical point. Nozzles must be clean, unbroken and properly installed or you  will never see the full benefit of your new fill replacement. Nozzles equally distributing water over the fill media is essential to tower performance and energy efficeincey.

The specifiction of  Cooling Tower Flower targer  Spray Nozzle 

Product name	cooling tower Spiral Target Nozzle
Other Name	cooling nozzle
MOQ	50 pcs
Packing	Carton
Delivery time	3-7 days

 

X-FLOW Target Nozzles Application : 

- Plating tanks 
- Cleaning tanks 
- Phosphating tanks 
- E-coat tanks 
- Fertilizer tanks 
- Pulp tanks 
- Sludge tanks
- Paint booths 
- Anodizing tanks 
- Cooling towers

BAC XF Nozzle pictures:

 

BAC cooling tower nozzle package:

 

 

Applications of X-FLOW target nozzles:

NOZZLES for field erected and package X-FLOW towers

Other cooling tower water spray nozzles pictures:

 

Cooling tower target nozzle also can be made as your request.

If you are interested in our products, please feel free to contact me.

FAQ

1.Q: Are you Trading Company or Factory:

   A:.  We are Trading Company and also Factory

 2.Q: What's your production ability for one month?

     A:We can product Metric Tons per Month 200000 pcs  .

 3.Q:  What's your MOQ?

     A:500pcs

 4.Q:What's your shipping port?

    A:Tianjin,shanghai or any port as your reqirement 

 5.Q: What's your Payment Terms?

    A:L/C,T/T,Western Union  

Try order is acceptable. Sample is available.

Welcome to inquire, we will feedback within  24 hours.