Steel Structure Square Sectional Assembled Modular Hot Dipped Galvanized Steel Water Tank
Hot dipped galvanized steel water tank is made from speacial slabs. The 1000T hydraulic press mould can make different size slabs (1*1m, 1*0.5m, 0.5*0.5m, 1.22*1.22m). With bolts and nuts, rubber strips, and other accessories, the slabs are connected into a water tank with different specifications and forms. Hot dipped galvanized steel water tank is anti-corrosion, anti-aging, no distorsion, no infiltration and no leakage. The tank is convenient to install and assemble, and easy to clean. It can store not only hot water, but also cold water, and has a better shockproof and shock resistant ability.
| Product Name |
Hot dipped galvanized steel water tank |
| Panel size |
1220*1220mm, 1000*1000mm, 1000*500mm, 500*500mm |
| Panel thickness |
6mm, 5mm, 4mm, 3mm, 2.5mm, 2mm |
| Process technique |
Ramming craft |
| Connection way |
Bolt & nut |
| Standard |
ISO9001, 12S101 |
| Raw material |
Steel |
| Working time |
More than 20 years |
Our sectional galvanized steel tanks come in a modular system, from capacities of 1000 liters to upward of 1000000 liters. Tanks are formed using prefabricated panels, cleats and internal bracing bolted together on site, to give an infinite range of sizes and capacities.
All mild steel components are hot-dipped galvanised and the tanks are sealed using our high quality double flanged gasket which adds an extra 4mm double ribbed sealing solution. This is an important key factor for the water sealing and longevity of the tank.
Our sectional galvanized steel tanks have the advantage of "Flat Packed" palletized consignments for economical transport, and enables rapid on-site assembly.
These tanks are installed on civil engineered concrete plinths, depending on client and site requirements.
Steel Structure Tower Description:
Steel Column: Q345B, HW175X175, HW200X200, hot dipped galvanized 600g/m2
Steel Main Beam: Q345B, HN350X175, hot dipped galvanized 600g/m2
Steel Secondary Beam: Q345B, HN250X125, I10, hot dipped galvanized 600g/m2
Brace: Q235B, L100*100*8, hot dipped galvanized 600g/m2
Ladder: Q235, hot dipped galvanized
Handrail: Q235, hot dipped galvanized
Steel Grating: Q235, hot dipped galvanized
Anchor Bolts: M24 Nuts, washers and templates for Anchor Bolts.
Steel Structure Tower Characteristics:
1. Strong: we can design the tower according to the weight and load of tank, wind load and seismic.
2. Fast construction and easy installation.
3. Long using life: Up to 50 years.
4. Others: Environmentally friendly, stable structure, earthquake proofing, water proofing, and energy conserving.
Accessories
Installation
With the right equipment and personnels, you can assemble the tank quickly. For a successful tank installation, you need at least five workers, one of whom should be qualified.
Here is a brief installation guide:
After getting a permit to install on a particular site, ensure you have all the required equipment.
They should be free of damage to prevent a substandard finish.
Check that the area of installation is level.
Assemble the beams horizontally on the foundation or steel tower to form the skid base.
Install the bottom panel carefully on the skid base.
Install the side panels. Once the side panels are in place, you can put up the panel partitions.
The panels should be joined using bolts and nuts, as per the manufacturer's recommendations.
Install the tie rods and stainless steel partitions to support the roof.
Assemble the top cover/roof.
Install internal and external stainless steel ladders.
Tie all stainless steel nuts and bolts with a washer.
After completing the installation and getting approval from a consultant, carry out a water leakage test. Connect a temporary water supply pipe and let the water stay in for at least 24 hours. Make sure you have enough air vents. If there are any leakages after the test period, rectify and seek approval.
For installation, we can provide installation guide: installation video or installation assistance on site by our engineers.If parts are damaged within the quality insurance period because of quality fault, we would change the damaged parts free of charge.
Package
Usually the galvanized steel water tank panels are packed with pallet, and the accessories are packed with wooden case.
Why choose us?
1.Highest quality
We are the manufacturer who adopts imported raw materials to guarantee the high quality.
2. Most competitive price
We can adjust the price according to your market demand changes, and also can launch a series of promotional activities in a bad economic environment.
3. Professional
We have a complete team, including development, procurement, production, inspection, sales and after-sale service.
4. Best service
We would give feedback within 24 hours. For any question or problem, we would try our best to help.
Trust, High quality and Best service build long term win-win business.
FAQ
Q: Are you trading company or manufacturer ?
A: We are a professional manufacturer with export certificate.
Q: What is your delivery time?
A: Generally it takes about 5-10 days if the goods you need are in stock as we just only need some time to pack the goods as the customer's request. Otherwise it takes about 15-20 days to arrange production and packing. If customers request customization the special size, it would take more time.
Q: Do you provide samples?
A: Yes, we could offer the sample for free charge, but do not pay the cost of freight.
Sample is available. Customization is accepted.
Welcome your inquiry, we would give feedback within 24 hours.
){kind=link}
){kind=link}